Products

MicroPly SC8020A low-density unsupported epoxy syntactic core. SC8020A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin walled composite sandwich structures

Toray MicroPly SC72A is a low-density unsupported epoxy syntactic core. Offering reduced processing, a one-shot cure, the ability to anchor inserts or fastenings & increases the opportunity to consider lightweight, thin-walled composite sandwich structures

Toray MicroPly™ EF8020 is a modified, high-strength, structural epoxy film adhesive for honeycomb core and laminate bonding. EF8020 is compatible for co-cure with Toray’s 8020 prepreg and SC8020 syntactic core.

Toray Cetex® TC915 is a thermoplastic composite using a high-performance polyamide matrix resin. This product provides exceptional mechanical properties higher than typical polyamide-based composites and Nylon materials.

Toray Cetex® TC910 is a high strength thermoplastic composite using a polyamide 6 (PA6) matrix resin designed for applications such as automotive and transportation. It provides good heat distortion temperatures and excellent solvent resistance.

Toray Cetex® TC1130 is a high-end thermoplastic composite, utilizing the amorphous PolyEtherSulphone (PESU) polymer for outstanding toughness and an inherently outstanding fire, smoke, and toxicity performance (< 15/15 OSU).

Toray Cetex® TC1000 Design is a cost-effective, high-end thermoplastic composite, utilizing the amorphous PEI polymer for outstanding toughness and an inherently outstanding fire, smoke, and toxicity performance (< 15/15 OSU).

Toray AmberTool® HX56 is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180ºC (356ºF) is achieved. Toray AmberTool® HX56 achieves an excellent surface finish for small to medium sized autoclave tooling.

Toray AmberTool® HX42 is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 210°C (410°F) is achieved. Toray AmberTool® HX42 has proven pedigree in aerospace tooling.

Toray AmberTool® HX40 is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 190ºC (374ºF) is achieved. Toray AmberTool® HX40 is ideal for high temperature larger scale tooling.

Toray TC750 is a toughened epoxy component prepreg developed for structural applications within high performance automotive. TC750 facilitates curing from 80°C (176°F) to 180°C (356°F) and can be pre-impregnated into a range of fiberand fabric types.

TC420 is a flow controlled cyanate ester prepreg, toughened to resist microcracking. TC420 is ideal for out of autoclave large structures in ultra high temperature applications. It is easy to process and yields a low void content under vacuum bag only.

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via low pressure vacuum bag/oven or under autoclave. TC250 can be post cured for a higher dry and wet Tg.

RS-1 is an epoxy prepreg which provides an excellent balance of mechanical properties, toughness and modulus. RS-1 has been evaluated and qualified in areas ranging from marine to aerospace. RS-1 is also available in a 80°C curing formulation.

E760 is a highly toughened epoxy component prepreg with exceptional high temperature performance. E760 has been designed for use in mechanically demanding structural applications exposed to elevated temperature environments e.g. Formula 1.

E750 is a toughened epoxy component prepreg developed for structural applications within Formula 1 and high performance automotive. E750 allows curing from 80°C (176°F) to 180°C (356°F) and can be impregnated into a range of fiber and fabric types.

E732 is a snap cure toughened epoxy resin matrix optimized for press curing (compression molding) prepreg applications. With a cure time of 4 minutes at 160°C (320°F), an onset Tg of 170°C (338°F) is achieved.

E726 is a 120°C (248°F) cure toughened epoxy prepreg with controlled flow. E726 is designed for use within medical and industrial applications. E726 is compatible for co-cure with EF72 film adhesive and Amlite SC72A syntactic core.

E722 is a 120°C (248°F) cure toughened epoxy component prepreg. E722 is designed for structural applications in motorsport and marine industries and, a wide range of engineering applications.

E721-FR is a 120°C (248°F) cure modified epoxy prepreg of medium viscosity. E721-FR offers excellent structural properties, flame retardancy and exceptional toughness allowing direct lamination to honeycomb without the use of a film adhesive.

E720 is a 120°C (248°F) cure toughened epoxy prepreg. E720 offers excellent adhesive properties, allowing direct lamination to honeycomb without the use of a film adhesive.

BT250E-1 is a 121°C (250°F) cure epoxy prepreg with excellent toughness and strength. It provides an outstanding surface finish with VBO. BT250E-1 is self-adhesive to honeycomb and foam core and, is MIL-R-9300 qualified.

Toray’s aluminum commercial grade honeycomb core is manufactured from corrosion-resistant 3003 alloy foil. It offers high strength-to-weight properties at relatively low cost, particularly suitable as a shear carrying core in sandwich panel structures.

8020-FR is a modified epoxy component prepreg offers excellent structural properties, flame retardancy, and toughness. The Toray 8020-FR resin system has been developed to offer a long out life and flexible cure schedules from 70–120°C (158–248°F).

8020 toughened epoxy component prepreg offers an excellent balance of mechanical properties and excellent surface finish. The Toray 8020 resin system has been developed to offer a long outlife and flexible cure schedules from 70-130°C (158-266°F).