Products

Toray MicroPly™ TC4015 cyanate ester film adhesive, formulated for low moisture absorption and high temperature bond strength applications. Its strength and toughness when bonding is often greater than epoxy and polyimides especially at high temperatures.

Toray MicroPly™ TC235SF-1 is an epoxy composite surfacing film, allowing a smooth, paintable surface from tooling or, a thin-skinned honeycomb stiffened composite structure. It may be cured under vacuum only pressure or under low autoclave pressure.

MicroPly SC8020A low-density unsupported epoxy syntactic core. SC8020A offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin walled composite sandwich structures

Toray MicroPly™ RS-4A is a cyanate ester based film adhesive developed to provide good adhesive performance for core / face skin structures, co-curing and secondary bonding.

Toray MicroPly™ EX-1543 cyanate ester film adhesive formulated for low moisture absorption and/or low dielectric constant and loss applications. It provides strength and toughness when bonding solid, honeycomb or foam core structures at high temperatures.

Toray MicroPly™ EX-1541 cyanate ester syntactic foam is unique due to its extremely low density and good structural properties. It does not require pressure during cure to achieve it mechanical properties and is easily machined to shape if required.

Toray MicroPly™ EM-5A is an expanding cyanate ester syntactic film (core splice). Its' unexpanded density is approximately 0.80 g/cc (50 pcf) and it exhibits an expansion ratio of up to 4 times. It is available in continuous film rolls or in sheet form.

Toray MicroPly™ EF8020 is a modified, high-strength, structural epoxy film adhesive for honeycomb core and laminate bonding. EF8020 is compatible for co-cure with Toray’s 8020 prepreg and SC8020 syntactic core.

Toray Cetex® TC1225 is a high-end thermoplastic composite material, utilizing a semi-crystalline low-melt polyarlyetherketone resin with excellent mechanical performance and lower processing temperatures.

Toray Cetex® TC1200 is a semi-crystalline polyetheretherketone thermoplastic composite, offering excellent resistance to chemicals and solvents. It is flame retardant and combines outstanding toughness with high temperature performance.

Toray Cetex® TC1000 Design is a cost-effective, high-end thermoplastic composite, utilizing the amorphous PEI polymer for outstanding toughness and an inherently outstanding fire, smoke, and toxicity performance (< 15/15 OSU).

Toray AmberTool® HX56 is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180ºC (356ºF) is achieved. Toray AmberTool® HX56 achieves an excellent surface finish for small to medium sized autoclave tooling.

Toray AmberTool® HX42 is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 210°C (410°F) is achieved. Toray AmberTool® HX42 has proven pedigree in aerospace tooling.

TC890 is a very high temperature polyimide prepreg utilizing PROOF 900HT resin system. It has a service temperature capability up to 427°C (800°F). It displays exceptional toughness, superb low dielectric loss properties and is thermally stable.

Toray TC522 is a highly toughened modified epoxy resin system. TC522 displays outstanding Compression After Impact (CAI), setting it apart from other resins designed for dielectric applications.

Toray TC346 is a high temperature epoxy component prepreg developed for structural applications within Formula 1 and high performance automotive.

TC275-1 is a dual cure toughened epoxy prepreg designed to facilitate composite part construction with low pressure or vacuum pressure cures. TC275-1’s out time allows the lay-up of thick or larger composite structure.

TC264-1 is a flame-retardant epoxy prepreg developed for oven-cure fabrication composite processes utilizing expendable or reusable lay-up mandrels. TC264-1 is ideal for use in applications such as ducting, decorative enclosures and panel assemblies.

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via low pressure vacuum bag/oven or under autoclave. TC250 can be post cured for a higher dry and wet Tg.

RS-36 is an advanced modified epoxy prepreg for structural composite applications. RS-36 offers an excellent balance of mechanical properties, low moisture absorption and a range of processing options. For a higher Tg, RS-36-1 is available

RS-3 is a modified cyanate ester prepreg, providing a good balance between toughness and high temperature/wet performance. RS-3 is qualified in satellite, airframe/missile and, radome structures. RS-3C is a controlled flow vacuum bag only cure version.

EX-1522 is a toughened modified epoxy prepreg. EX-1522 displays very low moisture absorption, also excellent mechanical and thermal properties. EX-1522 has a flammability rating of V-0, which lends itself to usage in low flammability applications.

E760 is a highly toughened epoxy component prepreg with exceptional high temperature performance. E760 has been designed for use in mechanically demanding structural applications exposed to elevated temperature environments e.g. Formula 1.

E750 is a toughened epoxy component prepreg developed for structural applications within Formula 1 and high performance automotive. E750 allows curing from 80°C (176°F) to 180°C (356°F) and can be impregnated into a range of fiber and fabric types.

E722 is a 120°C (248°F) cure toughened epoxy component prepreg. E722 is designed for structural applications in motorsport and marine industries and, a wide range of engineering applications.